Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.
Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index ff198d846fd2..b120a7e2e1ec 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -86,9 +86,9 @@ static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
[QPHY_COM_START_CONTROL] = 0x408,
[QPHY_COM_PCS_READY_STATUS] = 0x448,
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_STATUS] = 0x174,
+ [QPHY_SW_RESET] = QPHY_V2_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V2_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V2_PCS_PCI_PCS_STATUS,
};
static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
--
2.35.1
