The QPHY_PCS_MISC_TYPEC_CTRL register is not used, remove it from
register layout.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 3d920a834486..1c2c17880a40 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -94,8 +94,6 @@ enum qphy_reg_layout {
QPHY_PCS_AUTONOMOUS_MODE_CTRL,
QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
QPHY_PCS_POWER_DOWN_CONTROL,
- /* PCS_MISC registers */
- QPHY_PCS_MISC_TYPEC_CTRL,
/* Keep last to ensure regs_layout arrays are properly initialized */
QPHY_LAYOUT_SIZE
};
@@ -136,7 +134,6 @@ static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
[QPHY_PCS_STATUS] = 0x174,
- [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00,
};
static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
--
2.35.1
