Use symbolic names for the values inside reg layout arrays. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 32 +++++++++++----------- drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h | 4 +++ 2 files changed, 20 insertions(+), 16 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index 8fa66458c259..7de0ac23ff0b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -77,24 +77,24 @@ enum qphy_reg_layout { }; static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x44, - [QPHY_PCS_STATUS] = 0x14, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL, }; static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x174, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, + [QPHY_SW_RESET] = QPHY_V2_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V2_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V2_PCS_PCI_PCS_STATUS, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V2_PCS_POWER_DOWN_CONTROL, }; static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x174, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, + [QPHY_SW_RESET] = QPHY_V3_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL, }; static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { @@ -105,10 +105,10 @@ static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { }; static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x44, - [QPHY_PCS_STATUS] = 0x14, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL, }; static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = { diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h index c8515f506872..2624a1ec3e73 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h @@ -7,7 +7,9 @@ #define QCOM_PHY_QMP_PCS_V2_H_ /* Only for QMP V2 PHY - PCS registers */ +#define QPHY_V2_PCS_SW_RESET 0x000 #define QPHY_V2_PCS_POWER_DOWN_CONTROL 0x004 +#define QPHY_V2_PCS_START_CONTROL 0x008 #define QPHY_V2_PCS_TXDEEMPH_M6DB_V0 0x024 #define QPHY_V2_PCS_TXDEEMPH_M3P5DB_V0 0x028 #define QPHY_V2_PCS_TX_LARGE_AMP_DRV_LVL 0x034 @@ -43,4 +45,6 @@ #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0 +#define QPHY_V2_PCS_PCI_PCS_STATUS 0x174 /* PCI */ + #endif -- 2.35.1