[PATCH] arm64: dts: qcom: sm8450: drop incorrect spi-max-frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



spi-max-frequency is a property of SPI device, not the controller:

  qcom/sm8450-hdk.dtb: geniqup@8c0000: spi@880000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9bdda0163573..e9f34c102a6f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -794,7 +794,6 @@ spi15: spi@880000 {
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -834,7 +833,6 @@ spi16: spi@884000 {
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -874,7 +872,6 @@ spi17: spi@888000 {
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -914,7 +911,6 @@ spi18: spi@88c000 {
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -954,7 +950,6 @@ spi19: spi@890000 {
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1007,7 +1002,6 @@ spi20: spi@894000 {
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1047,7 +1041,6 @@ spi21: spi@898000 {
 				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux