[PATCH v2 2/3] ARM: dts: qcom-msm8960: use define for interrupt constants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace GIC_PPI, GIC_SPI and interrupt type numbers with appropriate
defines.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

---

Changes since v1:
1. Add Rb tag
---
 arch/arm/boot/dts/qcom-msm8960-cdp.dts |  2 +-
 arch/arm/boot/dts/qcom-msm8960.dtsi    | 22 ++++++++++++----------
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index cb0f612e6c90..3a484ac53917 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -42,7 +42,7 @@ ethernet@0 {
 		compatible = "micrel,ks8851";
 		reg = <0>;
 		interrupt-parent = <&msmgpio>;
-		interrupts = <90 8>;
+		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <5400000>;
 		vdd-supply = <&ext_l2>;
 		vdd-io-supply = <&pm8921_lvs6>;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 30abf53b062d..2f32e734f18d 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -17,7 +17,7 @@ / {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <1 14 0x304>;
+		interrupts = <GIC_PPI 14 0x304>;
 
 		cpu@0 {
 			compatible = "qcom,krait";
@@ -52,7 +52,7 @@ memory {
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 0x304>;
 		qcom,no-pc-write;
 	};
 
@@ -105,9 +105,9 @@ intc: interrupt-controller@2000000 {
 		timer@200a000 {
 			compatible = "qcom,kpss-timer",
 				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
+			interrupts = <GIC_PPI 1 0x301>,
+				     <GIC_PPI 2 0x301>,
+				     <GIC_PPI 3 0x301>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>,
 					  <32768>;
@@ -119,7 +119,7 @@ msmgpio: pinctrl@800000 {
 			gpio-controller;
 			gpio-ranges = <&msmgpio 0 0 152>;
 			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x800000 0x4000>;
@@ -255,7 +255,7 @@ ssbi@500000 {
 			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&msmgpio>;
-				interrupts = <104 8>;
+				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;
@@ -265,7 +265,8 @@ pwrkey@1c {
 					compatible = "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
 					pull-up;
 				};
@@ -274,7 +275,8 @@ keypad@148 {
 					compatible = "qcom,pm8921-keypad";
 					reg = <0x148>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <74 1>, <75 1>;
+					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+						     <75 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15>;
 					scan-delay = <32>;
 					row-hold = <91500>;
@@ -283,7 +285,7 @@ keypad@148 {
 				rtc@11d {
 					compatible = "qcom,pm8921-rtc";
 					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
 				};
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux