On 08/11/2022 03:18, Bryan O'Donoghue wrote:
> The Vision Mezzanine for the RB5 ships with an imx517 and ov9282 populated.
> Other sensors and components may be added or stacked with additional
> mezzanines.
>
> Enable both the IMX577
>
> An example media-ctl pipeline for the imx577 is:
>
> media-ctl --reset
> media-ctl -v -d /dev/media0 -V '"imx577 '22-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
>
> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../dts/qcom/qrb5165-rb5-vision-mezzanine.dts | 64 +++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 33 ++++++++++
> 3 files changed, 98 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b0558d3389e5..78f6e78d8ed4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
> new file mode 100644
> index 000000000000..307b09094e7f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Linaro Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "qrb5165-rb5.dts"
> +
> +&camss {
> + status = "okay";
> + vdda-phy-supply = <&vreg_l5a_0p88>;
> + vdda-pll-supply = <&vreg_l9a_1p2>;
> +
> + ports {
> + /* The port index denotes CSIPHY id i.e. csiphy2 */
> + port@2 {
> + reg = <2>;
> + csiphy2_ep: endpoint {
> + clock-lanes = <7>;
> + data-lanes = <0 1 2 3>;
> + remote-endpoint = <&imx577_ep>;
> + };
> +
No need for blank line.
Plus missing dtbs_check, as pointed out by Bjorn.
Best regards,
Krzysztof
