Update the fingerprint node on Trogdor to match the fingerprint DT
binding. This will allow us to drive the reset and boot gpios from the
driver when it is re-attached after flashing. We'll also be able to boot
the fingerprint processor if the BIOS isn't doing it for us.
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Cc: Alexandru M Stan <amstan@xxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 4a5ea17a15ba..65601bea0797 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -894,13 +894,16 @@ ap_spi_fp: &spi10 {
cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
cros_ec_fp: ec@0 {
- compatible = "google,cros-ec-spi";
+ compatible = "google,cros-ec-fp", "google,cros-ec-spi";
reg = <0>;
interrupt-parent = <&tlmm>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&fp_to_ap_irq_l>;
+ pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+ boot0-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
spi-max-frequency = <3000000>;
+ vdd-supply = <&pp3300_fp_tp>;
};
};
@@ -1226,6 +1229,13 @@ en_pp3300_hub: en-pp3300-hub-state {
bias-disable;
};
+ fp_rst_l: fp-rst-l-state {
+ pins = "gpio22";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
fp_to_ap_irq_l: fp-to-ap-irq-l-state {
pins = "gpio4";
function = "gpio";
@@ -1235,6 +1245,12 @@ fp_to_ap_irq_l: fp-to-ap-irq-l-state {
bias-disable;
};
+ fpmcu_boot0: fpmcu-boot0-state {
+ pins = "gpio10";
+ function = "gpio";
+ bias-disable;
+ };
+
h1_ap_int_odl: h1-ap-int-odl-state {
pins = "gpio42";
function = "gpio";
--
https://chromeos.dev
