Re: [PATCH 3/3] arm64: dts: qcom: hk01: use GPIO flags for tlmm

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 07/11/2022 10:29, Robert Marko wrote:
> Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
> harcoding the cell value.
>
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>   arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++--
>   1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> index b60b2d4c2ea5..c3f3f78271e9 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -4,6 +4,7 @@
>    */
>   #include "ipq8074.dtsi"
>   #include "pmp8074.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>   
>   / {
>   	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
> @@ -52,12 +53,12 @@ &blsp1_uart5 {
>   
>   &pcie0 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 61 0x1>;
> +	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie1 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 58 0x1>;
> +	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie_phy0 {