Reviewed-by: Dov Levenglick <dovl@xxxxxxxxxxxxxx>
> This change adds a support for a 14nm qcom-ufs phy that is
> required in platforms that use ufs-qcom controller.
>
> Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
>
> ---
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-qcom-ufs-qmp-14nm.c | 201
> ++++++++++++++++++++++++++++++++++++
> drivers/phy/phy-qcom-ufs-qmp-14nm.h | 177 +++++++++++++++++++++++++++++++
> 3 files changed, 379 insertions(+)
> create mode 100644 drivers/phy/phy-qcom-ufs-qmp-14nm.c
> create mode 100644 drivers/phy/phy-qcom-ufs-qmp-14nm.h
>
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 781b2fa..cfbb720 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -36,3 +36,4 @@ obj-$(CONFIG_PHY_STIH407_USB) +=
> phy-stih407-usb.o
> obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
> obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
> obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
> +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> new file mode 100644
> index 0000000..f5fc50a
> --- /dev/null
> +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> @@ -0,0 +1,201 @@
> +/*
> + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include "phy-qcom-ufs-qmp-14nm.h"
> +
> +#define UFS_PHY_NAME "ufs_phy_qmp_14nm"
> +#define UFS_PHY_VDDA_PHY_UV (925000)
> +
> +static
> +int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy
> *ufs_qcom_phy,
> + bool is_rate_B)
> +{
> + int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
> + int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
> + int err;
> +
> + err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A,
> + tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B);
> +
> + if (err)
> + dev_err(ufs_qcom_phy->dev,
> + "%s: ufs_qcom_phy_calibrate() failed %d\n",
> + __func__, err);
> + return err;
> +}
> +
> +static
> +void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy
> *phy_common)
> +{
> + phy_common->quirks =
> + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
> +}
> +
> +static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy);
> + struct ufs_qcom_phy *phy_common = &phy->common_cfg;
> + int err;
> +
> + err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
> + if (err) {
> + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks()
> failed %d\n",
> + __func__, err);
> + goto out;
> + }
> +
> + err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
> + if (err) {
> + dev_err(phy_common->dev, "%s:
> ufs_qcom_phy_init_vregulators() failed %d\n",
> + __func__, err);
> + goto out;
> + }
> + phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
> + phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
> +
> + ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common);
> +
> +out:
> + return err;
> +}
> +
> +static
> +void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool
> val)
> +{
> + writel_relaxed(val ? 0x1 : 0x0, phy->mmio +
> UFS_PHY_POWER_DOWN_CONTROL);
> + /*
> + * Before any transactions involving PHY, ensure PHY knows
> + * that it's analog rail is powered ON (or OFF).
> + */
> + mb();
> +}
> +
> +static inline
> +void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy,
> u32 val)
> +{
> + /*
> + * 14nm PHY does not have TX_LANE_ENABLE register.
> + * Implement this function so as not to propagate error to caller.
> + */
> +}
> +
> +static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy
> *phy)
> +{
> + u32 tmp;
> +
> + tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
> + tmp &= ~MASK_SERDES_START;
> + tmp |= (1 << OFFSET_SERDES_START);
> + writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
> + /* Ensure register value is committed */
> + mb();
> +}
> +
> +static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy
> *phy_common)
> +{
> + int err = 0;
> + u32 val;
> +
> + err = readl_poll_timeout(phy_common->mmio +
> UFS_PHY_PCS_READY_STATUS,
> + val, (val & MASK_PCS_READY), 10, 1000000);
> + if (err)
> + dev_err(phy_common->dev, "%s: poll for pcs failed err =
> %d\n",
> + __func__, err);
> + return err;
> +}
> +
> +static struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
> + .init = ufs_qcom_phy_qmp_14nm_init,
> + .exit = ufs_qcom_phy_exit,
> + .power_on = ufs_qcom_phy_power_on,
> + .power_off = ufs_qcom_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
> + .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate,
> + .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
> + .is_physical_coding_sublayer_ready =
> ufs_qcom_phy_qmp_14nm_is_pcs_ready,
> + .set_tx_lane_enable =
> ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
> + .power_control = ufs_qcom_phy_qmp_14nm_power_control,
> +};
> +
> +static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy *generic_phy;
> + struct ufs_qcom_phy_qmp_14nm *phy;
> + int err = 0;
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy) {
> + dev_err(dev, "%s: failed to allocate phy\n", __func__);
> + err = -ENOMEM;
> + goto out;
> + }
> +
> + generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
> + &ufs_qcom_phy_qmp_14nm_phy_ops,
> &phy_14nm_ops);
> +
> + if (!generic_phy) {
> + dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
> + __func__);
> + err = -EIO;
> + goto out;
> + }
> +
> + phy_set_drvdata(generic_phy, phy);
> +
> + strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
> + sizeof(phy->common_cfg.name));
> +
> +out:
> + return err;
> +}
> +
> +static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy *generic_phy = to_phy(dev);
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> + int err = 0;
> +
> + err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
> + if (err)
> + dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
> + __func__, err);
> +
> + return err;
> +}
> +
> +static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = {
> + {.compatible = "qcom,ufs-phy-qmp-14nm"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match);
> +
> +static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = {
> + .probe = ufs_qcom_phy_qmp_14nm_probe,
> + .remove = ufs_qcom_phy_qmp_14nm_remove,
> + .driver = {
> + .of_match_table = ufs_qcom_phy_qmp_14nm_of_match,
> + .name = "ufs_qcom_phy_qmp_14nm",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(ufs_qcom_phy_qmp_14nm_driver);
> +
> +MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h
> b/drivers/phy/phy-qcom-ufs-qmp-14nm.h
> new file mode 100644
> index 0000000..3aefdba
> --- /dev/null
> +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.h
> @@ -0,0 +1,177 @@
> +/*
> + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef UFS_QCOM_PHY_QMP_14NM_H_
> +#define UFS_QCOM_PHY_QMP_14NM_H_
> +
> +#include "phy-qcom-ufs-i.h"
> +
> +/* QCOM UFS PHY control registers */
> +#define COM_OFF(x) (0x000 + x)
> +#define PHY_OFF(x) (0xC00 + x)
> +#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
> +#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
> +
> +/* UFS PHY QSERDES COM registers */
> +#define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
> +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
> +#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
> +#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
> +#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
> +#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
> +#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
> +#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
> +#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
> +#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
> +#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
> +#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
> +#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
> +#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
> +#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
> +#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
> +#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
> +#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
> +#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
> +#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
> +#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
> +#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
> +#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
> +#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
> +#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
> +#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
> +#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
> +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
> +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
> +#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
> +#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
> +#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
> +#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
> +#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
> +#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
> +#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
> +#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
> +#define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
> +#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
> +#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
> +#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
> +#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
> +#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
> +#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
> +
> +/* UFS PHY registers */
> +#define UFS_PHY_PHY_START PHY_OFF(0x00)
> +#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
> +#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
> +
> +/* UFS PHY TX registers */
> +#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
> +#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
> +
> +/* UFS PHY RX registers */
> +#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
> +#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
> +#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
> +#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
> +#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
> +#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
> +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
> +#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
> +#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
> +#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
> +#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
> +
> +/*
> + * This structure represents the 14nm specific phy.
> + * common_cfg MUST remain the first field in this structure
> + * in case extra fields are added. This way, when calling
> + * get_ufs_qcom_phy() of generic phy, we can extract the
> + * common phy structure (struct ufs_qcom_phy) out of it
> + * regardless of the relevant specific phy.
> + */
> +struct ufs_qcom_phy_qmp_14nm {
> + struct ufs_qcom_phy common_cfg;
> +};
> +
> +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
> + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> +
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN,
> 0x45),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
> +
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
> +};
> +
> +static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
> +};
> +
> +#endif
> --
> 1.8.5.2
>
> --
> QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
