This series adds support for the PCIe PHYs on SC8280XP including its
four-lane PHYs.
The first half of the series clean up the driver in preparation for
supporting SC8280XP and its new devicetree bindings that drops the
legacy child node and the (incomplete) description of register
subregions.
The other QMP bindings suffer from similar problems and follow-on series
will do corresponding changes to the UFS, USB and combo QMP bindings and
drivers.
Johan
Changes in v5
- use the shorter tables identifier throughout the driver (Vinod)
Changes in v4
- break out switch to shorter tables identifier in a preparatory patch
(Vinod)
Changes in v3
- use bulk clk API for pipe clocks (Dmitry)
Changes in v2
- rename current DT schema after first SoC added to the original
bindings (IPQ8074) and add a reference to the new SC8280XP bindings
instead of marking the current bindings as "legacy" (Krzysztof)
- add "sc8280xp" infix to the new DT schema filename (Krzysztof)
- tighten description of the 'qcom,4ln-config-sel' phandle array
(Krzysztof)
Johan Hovold (16):
phy: qcom-qmp-pcie: sort device-id table
phy: qcom-qmp-pcie: move device-id table
phy: qcom-qmp-pcie: merge driver data
phy: qcom-qmp-pcie: clean up device-tree parsing
phy: qcom-qmp-pcie: clean up probe initialisation
phy: qcom-qmp-pcie: rename PHY ops structure
phy: qcom-qmp-pcie: clean up PHY lane init
phy: qcom-qmp-pcie: use shorter tables identifiers
phy: qcom-qmp-pcie: add register init helper
dt-bindings: phy: qcom,qmp-pcie: rename current bindings
dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings
phy: qcom-qmp-pcie: restructure PHY creation
phy: qcom-qmp-pcie: fix initialisation reset
phy: qcom-qmp-pcie: add support for pipediv2 clock
phy: qcom-qmp-pcie: add support for sc8280xp
phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs
...hy.yaml => qcom,ipq8074-qmp-pcie-phy.yaml} | 7 +-
.../phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 165 ++++
drivers/phy/qualcomm/Kconfig | 1 +
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 874 ++++++++++++------
.../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 2 +
5 files changed, 770 insertions(+), 279 deletions(-)
rename Documentation/devicetree/bindings/phy/{qcom,qmp-pcie-phy.yaml => qcom,ipq8074-qmp-pcie-phy.yaml} (96%)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
--
2.37.4
