[PATCH v3 4/8] drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SM8350 and SM8450 use 5nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle 5nm
variants inside the common 5+7nm driver.

Co-developed-by: Robert Foss <robert.foss@xxxxxxxxxx>
Tested-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/Kconfig               |   6 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |   2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 128 ++++++++++++++++++++--
 4 files changed, 127 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 3c9dfdb0b328..e7b100d97f88 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -140,12 +140,12 @@ config DRM_MSM_DSI_10NM_PHY
 	  Choose this option if DSI PHY on SDM845 is used on the platform.
 
 config DRM_MSM_DSI_7NM_PHY
-	bool "Enable DSI 7nm PHY driver in MSM DRM"
+	bool "Enable DSI 7nm/5nm PHY driver in MSM DRM"
 	depends on DRM_MSM_DSI
 	default y
 	help
-	  Choose this option if DSI PHY on SM8150/SM8250/SC7280 is used on
-	  the platform.
+	  Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280
+	  is used on the platform.
 
 config DRM_MSM_HDMI
 	bool "Enable HDMI support in MSM DRM driver"
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index ee6051367679..0c956fdab23e 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -569,6 +569,10 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	  .data = &dsi_phy_7nm_8150_cfgs },
 	{ .compatible = "qcom,sc7280-dsi-phy-7nm",
 	  .data = &dsi_phy_7nm_7280_cfgs },
+	{ .compatible = "qcom,dsi-phy-5nm-8350",
+	  .data = &dsi_phy_5nm_8350_cfgs },
+	{ .compatible = "qcom,dsi-phy-5nm-8450",
+	  .data = &dsi_phy_5nm_8450_cfgs },
 #endif
 	{}
 };
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 1096afedd616..f7a907ed2b4b 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -57,6 +57,8 @@ extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
 
 struct msm_dsi_dphy_timing {
 	u32 clk_zero;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 9e7fa7d88ead..00d92fe97bc3 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -39,8 +39,14 @@
 #define VCO_REF_CLK_RATE		19200000
 #define FRAC_BITS 18
 
+/* Hardware is pre V4.1 */
+#define DSI_PHY_7NM_QUIRK_PRE_V4_1	BIT(0)
 /* Hardware is V4.1 */
-#define DSI_PHY_7NM_QUIRK_V4_1		BIT(0)
+#define DSI_PHY_7NM_QUIRK_V4_1		BIT(1)
+/* Hardware is V4.2 */
+#define DSI_PHY_7NM_QUIRK_V4_2		BIT(2)
+/* Hardware is V4.3 */
+#define DSI_PHY_7NM_QUIRK_V4_3		BIT(3)
 
 struct dsi_pll_config {
 	bool enable_ssc;
@@ -116,7 +122,7 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 	dec_multiple = div_u64(pll_freq * multiplier, divider);
 	dec = div_u64_rem(dec_multiple, multiplier, &frac);
 
-	if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1))
+	if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)
 		config->pll_clock_inverters = 0x28;
 	else if (pll_freq <= 1000000000ULL)
 		config->pll_clock_inverters = 0xa0;
@@ -197,16 +203,25 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
 	void __iomem *base = pll->phy->pll_base;
 	u8 analog_controls_five_1 = 0x01, vco_config_1 = 0x00;
 
-	if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
+	if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1))
 		if (pll->vco_current_rate >= 3100000000ULL)
 			analog_controls_five_1 = 0x03;
 
+	if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		if (pll->vco_current_rate < 1520000000ULL)
 			vco_config_1 = 0x08;
 		else if (pll->vco_current_rate < 2990000000ULL)
 			vco_config_1 = 0x01;
 	}
 
+	if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_2) ||
+	    (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) {
+		if (pll->vco_current_rate < 1520000000ULL)
+			vco_config_1 = 0x08;
+		else if (pll->vco_current_rate >= 2990000000ULL)
+			vco_config_1 = 0x01;
+	}
+
 	dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
 		      analog_controls_five_1);
 	dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
@@ -231,9 +246,9 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
 	dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x2f);
 	dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_IFILT, 0x2a);
 	dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_IFILT,
-		  pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1 ? 0x3f : 0x22);
+		  !(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1) ? 0x3f : 0x22);
 
-	if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
+	if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)) {
 		dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
 		if (pll->slave)
 			dsi_phy_write(pll->slave->phy->pll_base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
@@ -788,7 +803,7 @@ static void dsi_phy_hw_v4_0_lane_settings(struct msm_dsi_phy *phy)
 	const u8 *tx_dctrl = tx_dctrl_0;
 	void __iomem *lane_base = phy->lane_base;
 
-	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1)
+	if (!(phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1))
 		tx_dctrl = tx_dctrl_1;
 
 	/* Strength ctrl settings */
@@ -844,6 +859,12 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	if (dsi_phy_hw_v4_0_is_pll_on(phy))
 		pr_warn("PLL turned on before configuring PHY\n");
 
+	/* Request for REFGEN READY */
+	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+		dsi_phy_write(phy->base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1);
+		udelay(500);
+	}
+
 	/* wait for REFGEN READY */
 	ret = readl_poll_timeout_atomic(base + REG_DSI_7nm_PHY_CMN_PHY_STATUS,
 					status, (status & BIT(0)),
@@ -858,23 +879,53 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	/* Alter PHY configurations if data rate less than 1.5GHZ*/
 	less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
 
-	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
-		vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
+	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+		if (phy->cphy_mode) {
+			vreg_ctrl_0 = 0x51;
+			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x01;
+			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  0x3b;
+			glbl_str_swi_cal_sel_ctrl = 0x00;
+			glbl_hstx_str_ctrl_0 = 0x00;
+		} else {
+			vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
+			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x01;
+			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  0x39;
+			glbl_str_swi_cal_sel_ctrl = 0x00;
+			glbl_hstx_str_ctrl_0 = 0x88;
+		}
+	} else if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_2) {
+		if (phy->cphy_mode) {
+			vreg_ctrl_0 = 0x51;
+			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x01;
+			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  0x3b;
+			glbl_str_swi_cal_sel_ctrl = 0x00;
+			glbl_hstx_str_ctrl_0 = 0x00;
+		} else {
+			vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
+			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c :  0x00;
+			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  0x39;
+			glbl_str_swi_cal_sel_ctrl = 0x00;
+			glbl_hstx_str_ctrl_0 = 0x88;
+		}
+	} else if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		if (phy->cphy_mode) {
+			vreg_ctrl_0 = 0x51;
 			glbl_rescode_top_ctrl = 0x00;
 			glbl_rescode_bot_ctrl = 0x3c;
 		} else {
+			vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
 			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x00;
 			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 :  0x3c;
 		}
 		glbl_str_swi_cal_sel_ctrl = 0x00;
 		glbl_hstx_str_ctrl_0 = 0x88;
 	} else {
-		vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
 		if (phy->cphy_mode) {
+			vreg_ctrl_0 = 0x51;
 			glbl_str_swi_cal_sel_ctrl = 0x03;
 			glbl_hstx_str_ctrl_0 = 0x66;
 		} else {
+			vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
 			glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
 			glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
 		}
@@ -883,7 +934,6 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	}
 
 	if (phy->cphy_mode) {
-		vreg_ctrl_0 = 0x51;
 		vreg_ctrl_1 = 0x55;
 		glbl_pemph_ctrl_0 = 0x11;
 		lane_ctrl0 = 0x17;
@@ -1017,6 +1067,13 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
 		pr_warn("Turning OFF PHY while PLL is on\n");
 
 	dsi_phy_hw_v4_0_config_lpcdrx(phy, false);
+
+	/* Turn off REFGEN Vote */
+        dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x0);
+        wmb();
+        /* Delay to ensure HW removes vote before PHY shut down */
+        udelay(2);
+
 	data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_CTRL_0);
 
 	/* disable all lanes */
@@ -1040,6 +1097,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_37750uA_regulators[] = {
 	{ .supply = "vdds", .init_load_uA = 37550 },
 };
 
+static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = {
+	{ .supply = "vdds", .init_load_uA = 97800},
+};
+
 const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
 	.has_phy_lane = true,
 	.regulator_data = dsi_phy_7nm_36mA_regulators,
@@ -1079,6 +1140,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = {
 	.max_pll_rate = 3500000000UL,
 	.io_start = { 0xae94400, 0xae96400 },
 	.num_dsi_phy = 2,
+	.quirks = DSI_PHY_7NM_QUIRK_PRE_V4_1,
 };
 
 const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = {
@@ -1102,3 +1164,49 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = {
 	.num_dsi_phy = 1,
 	.quirks = DSI_PHY_7NM_QUIRK_V4_1,
 };
+
+const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs = {
+	.has_phy_lane = true,
+	.regulator_data = dsi_phy_7nm_37750uA_regulators,
+	.num_regulators = ARRAY_SIZE(dsi_phy_7nm_37750uA_regulators),
+	.ops = {
+		.enable = dsi_7nm_phy_enable,
+		.disable = dsi_7nm_phy_disable,
+		.pll_init = dsi_pll_7nm_init,
+		.save_pll_state = dsi_7nm_pll_save_state,
+		.restore_pll_state = dsi_7nm_pll_restore_state,
+		.set_continuous_clock = dsi_7nm_set_continuous_clock,
+	},
+	.min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+	.max_pll_rate = 5000000000UL,
+#else
+	.max_pll_rate = ULONG_MAX,
+#endif
+	.io_start = { 0xae94400, 0xae96400 },
+	.num_dsi_phy = 2,
+	.quirks = DSI_PHY_7NM_QUIRK_V4_2,
+};
+
+const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
+	.has_phy_lane = true,
+	.regulator_data = dsi_phy_7nm_97800uA_regulators,
+	.num_regulators = ARRAY_SIZE(dsi_phy_7nm_97800uA_regulators),
+	.ops = {
+		.enable = dsi_7nm_phy_enable,
+		.disable = dsi_7nm_phy_disable,
+		.pll_init = dsi_pll_7nm_init,
+		.save_pll_state = dsi_7nm_pll_save_state,
+		.restore_pll_state = dsi_7nm_pll_restore_state,
+		.set_continuous_clock = dsi_7nm_set_continuous_clock,
+	},
+	.min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+	.max_pll_rate = 5000000000UL,
+#else
+	.max_pll_rate = ULONG_MAX,
+#endif
+	.io_start = { 0xae94400, 0xae96400 },
+	.num_dsi_phy = 2,
+	.quirks = DSI_PHY_7NM_QUIRK_V4_3,
+};
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux