Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp: update UFS PHY nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 04/11/2022 10:20, Johan Hovold wrote:
Update the UFS PHY nodes to match the new binding.

Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>


Konrad

  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 49 +++++++++-----------------
  1 file changed, 17 insertions(+), 32 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index e0d0fb6994b5..1b309fa93484 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -896,7 +896,7 @@ ufs_mem_hc: ufs@1d84000 {
  				     "jedec,ufs-2.0";
  			reg = <0 0x01d84000 0 0x3000>;
  			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
  			phy-names = "ufsphy";
  			lanes-per-direction = <2>;
  			#reset-cells = <1>;
@@ -937,27 +937,20 @@ ufs_mem_hc: ufs@1d84000 {
ufs_mem_phy: phy@1d87000 {
  			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
+			reg = <0 0x01d87000 0 0x1000>;
+
  			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
  				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
resets = <&ufs_mem_hc 0>;
  			reset-names = "ufsphy";
-			status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
  		};
ufs_card_hc: ufs@1da4000 {
@@ -965,7 +958,7 @@ ufs_card_hc: ufs@1da4000 {
  				     "jedec,ufs-2.0";
  			reg = <0 0x01da4000 0 0x3000>;
  			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_card_phy_lanes>;
+			phys = <&ufs_card_phy>;
  			phy-names = "ufsphy";
  			lanes-per-direction = <2>;
  			#reset-cells = <1>;
@@ -1005,28 +998,20 @@ ufs_card_hc: ufs@1da4000 {
ufs_card_phy: phy@1da7000 {
  			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01da7000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
+			reg = <0 0x01da7000 0 0x1000>;
+
  			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
  				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_CARD_GDSC>;
resets = <&ufs_card_hc 0>;
  			reset-names = "ufsphy";
- status = "disabled";
+			#phy-cells = <0>;
- ufs_card_phy_lanes: phy@1da7400 {
-				reg = <0 0x01da7400 0 0x108>,
-				      <0 0x01da7600 0 0x1e0>,
-				      <0 0x01da7c00 0 0x1dc>,
-				      <0 0x01da7800 0 0x108>,
-				      <0 0x01da7a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
  		};
tcsr_mutex: hwlock@1f40000 {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux