On 30.10.2022 08:32, Marijn Suijten wrote:
> In addition to the sdc2 pins, set the SD Card Detect pin in a sane state
> to be used as an interrupt when an SD Card is slotted in or removed.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> .../qcom/sm6350-sony-xperia-lena-pdx213.dts | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index 36911b9a5c04..9a96000fc95b 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -30,6 +30,24 @@ framebuffer: framebuffer@a0000000 {
> };
> };
>
> +&sdc2_off_state {
> + sd-cd-pins {
> + pins = "gpio94";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> +
> +&sdc2_on_state {
> + sd-cd-pins {
> + pins = "gpio94";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +};
> +
> &sdhc_2 {
> status = "okay";
>
