Re: [PATCH 1/2] slimbus: qcom-ngd-ctrl: check for device runtime PM status during ISR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 28/09/2022 14:20, Krzysztof Kozlowski wrote:
Slimbus core interrupt is getting fired after suspend. At this point
ADSP slimbus hardware is off with gated clocks which is leading to an
unclocked access when HLOS slimbus tried to read the interrupt
status register in the ISR.

Co-developed-by: Chandana Kishori Chiluveru <cchiluve@xxxxxxxxxxxxxx>
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@xxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---

Applied both,

--srini
  drivers/slimbus/qcom-ngd-ctrl.c | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index cec11aa106bf..ba36eb5c0de3 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -763,7 +763,14 @@ static irqreturn_t qcom_slim_ngd_interrupt(int irq, void *d)
  {
  	struct qcom_slim_ngd_ctrl *ctrl = d;
  	void __iomem *base = ctrl->ngd->base;
-	u32 stat = readl(base + NGD_INT_STAT);
+	u32 stat;
+
+	if (pm_runtime_suspended(ctrl->ctrl.dev)) {
+		dev_warn_once(ctrl->dev, "Interrupt received while suspended\n");
+		return IRQ_NONE;
+	}
+
+	stat = readl(base + NGD_INT_STAT);
if ((stat & NGD_INT_MSG_BUF_CONTE) ||
  		(stat & NGD_INT_MSG_TX_INVAL) || (stat & NGD_INT_DEV_ERR) ||



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux