The spmi-vadc bindings require the '@' in the node.
Additionally change the node name to adc-chan which both makes it a
generic node name and also removes the underscore from it.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Changes in v2:
* Make commit message more accurate
* Make number actually hex in node address (made it decimal before)
arch/arm/boot/dts/qcom-pma8084.dtsi | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 0da6c1a5d547..2dd4c6aa71c9 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -64,22 +64,27 @@ pma8084_vadc: adc@3100 {
#size-cells = <0>;
#io-channel-cells = <1>;
- die_temp {
+ adc-chan@8 {
reg = <VADC_DIE_TEMP>;
};
- ref_625mv {
+
+ adc-chan@9 {
reg = <VADC_REF_625MV>;
};
- ref_1250v {
+
+ adc-chan@a {
reg = <VADC_REF_1250MV>;
};
- ref_buf_625mv {
+
+ adc-chan@c {
reg = <VADC_SPARE1>;
};
- ref_gnd {
+
+ adc-chan@e {
reg = <VADC_GND_REF>;
};
- ref_vdd {
+
+ adc-chan@f {
reg = <VADC_VDD_VADC>;
};
};
--
2.38.1
