Thermal Monitoring block ADC5 (TM5) in PMK8280 can be used to monitor the
temperature from slave PMICs like PM8280.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 32086d5edd0d..d55f0a9cea61 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -86,6 +86,16 @@ pmk8280_vadc: adc@3100 {
#io-channel-cells = <1>;
io-channel-ranges;
};
+
+ pmk8280_adc_tm: adc-tm@3400 {
+ compatible = "qcom,spmi-adc-tm5-gen2";
+ reg = <0x3400>;
+ interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
};
pmc8280_1: pmic@1 {
--
2.25.1
