Re: [PATCH v4 1/3] arm64: dts: qcom: sc7180-trogdor-homestar: fully configure secondary I2S pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Krzysztof Kozlowski (2022-10-20 15:51:33)
> The Trogdor Homestar DTSI adds additional GPIO52 pin to secondary I2S pins
> ("sec_mi2s_active") and configures it to "mi2s_1" function.
>
> The Trogdor DTSI (which is included by Homestar) configures drive
> strength and bias for all "sec_mi2s_active" pins, thus the intention was
> to apply this configuration also to GPIO52 on Homestar.
>
> Reported-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Fixes: be0416a3f917 ("arm64: dts: qcom: Add sc7180-trogdor-homestar")
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
>
> ---

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux