According to the `/* bpc 8 */` comment below only values for a bits_per_component of 8 are currently hardcoded in place. This is further confirmed by downstream sources [1] containing different constants for other BPC values (and different initial_offset too, with an extra dependency on bits_per_pixel). Prevent future mishaps by explicitly disallowing any other bits_per_component value until the right parameters are put in place and tested. [1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/DISPLAY.LA.2.0.r1-08000-WAIPIO.0/msm/sde_dsc_helper.c#L110-139 Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 8da27c740c1c..4bd8301d2049 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1783,6 +1783,11 @@ static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc return -EINVAL; } + if (dsc->bits_per_component != 8) { + DRM_DEV_ERROR(&msm_host->pdev->dev, "DSI does not support bits_per_component != 8 yet\n"); + return -EOPNOTSUPP; + } + dsc->rc_model_size = 8192; dsc->first_line_bpg_offset = 12; dsc->rc_edge_factor = 6; -- 2.38.1
