Rename the PHY operation structure so that it has a "phy_ops" suffix and
move it next to the implementation.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 2e603831e45e..4a7b961d2965 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -2149,6 +2149,13 @@ static int qmp_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
return 0;
}
+static const struct phy_ops qmp_usb_phy_ops = {
+ .init = qmp_usb_enable,
+ .exit = qmp_usb_disable,
+ .set_mode = qmp_usb_set_mode,
+ .owner = THIS_MODULE,
+};
+
static void qmp_usb_enable_autonomous_mode(struct qmp_usb *qmp)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2366,13 +2373,6 @@ static int phy_pipe_clk_register(struct qmp_usb *qmp, struct device_node *np)
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static const struct phy_ops qmp_usb_ops = {
- .init = qmp_usb_enable,
- .exit = qmp_usb_disable,
- .set_mode = qmp_usb_set_mode,
- .owner = THIS_MODULE,
-};
-
static void __iomem *qmp_usb_iomap(struct device *dev, struct device_node *np,
int index, bool exclusive)
{
@@ -2451,7 +2451,7 @@ static int qmp_usb_create(struct qmp_usb *qmp, struct device_node *np)
"failed to get pipe clock\n");
}
- generic_phy = devm_phy_create(dev, np, &qmp_usb_ops);
+ generic_phy = devm_phy_create(dev, np, &qmp_usb_phy_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
dev_err(dev, "failed to create PHY: %d\n", ret);
--
2.37.3
