Re: [PATCH] arm64: dts: qcom: qrb5165-rb5: Disable cpuidle states

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 19 Oct 2022 at 17:28, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
>
> On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@xxxxxxxxxx> wrote:
> >
> > Disable cpuidle states for RB5. These cpuidle states
> > made the device highly unstable and it runs into the
> > following crash frequently:
> >
> > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> >
> > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > Signed-off-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > index cc003535a3c5..f936c41bfbea 100644
> > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > @@ -251,6 +251,14 @@ qca639x: qca639x {
> >
> >  };
> >
> > +&LITTLE_CPU_SLEEP_0 {
> > +       status = "disabled";
> > +};
> > +
> > +&BIG_CPU_SLEEP_0 {
> > +       status = "disabled";
> > +};
> > +
> >  &adsp {
> >         status = "okay";
> >         firmware-name = "qcom/sm8250/adsp.mbn";
> > --
> > 2.25.1
>
> Disabling the CPU idlestates, will revert us back to using only the WFI state.
>
> An option that probably works too is to just drop the idlestate for
> the CPU cluster. Would you mind trying the below and see if that works
> too?

Following change works too for my RB5 setup.
I didn't see any obvious regression in my limited (~10) test runs so far.

Regards,
Amit Pundir

>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index c32227ea40f9..c707a49e8001 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
>
>                 CLUSTER_PD: cpu-cluster0 {
>                         #power-domain-cells = <0>;
> -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
>                 };
>         };
>
> Kind regards
> Uffe



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux