Use SM6350 as fallback for GPI DMA, to indicate devices are compatible
and that drivers can bind with only one compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d32f08df743d..e01a019d8b23 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -730,7 +730,7 @@ gcc: clock-controller@100000 {
};
gpi_dma2: dma-controller@800000 {
- compatible = "qcom,sm8450-gpi-dma";
+ compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
#dma-cells = <3>;
reg = <0 0x800000 0 0x60000>;
interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
@@ -1058,7 +1058,7 @@ spi21: spi@898000 {
};
gpi_dma0: dma-controller@900000 {
- compatible = "qcom,sm8450-gpi-dma";
+ compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
#dma-cells = <3>;
reg = <0 0x900000 0 0x60000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
@@ -1394,7 +1394,7 @@ uart7: serial@99c000 {
};
gpi_dma1: dma-controller@a00000 {
- compatible = "qcom,sm8450-gpi-dma";
+ compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
#dma-cells = <3>;
reg = <0 0xa00000 0 0x60000>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
--
2.34.1
