[RESEND PATCH 4/7] arm64: dts: qcom: sdm845-oneplus-common: commonize uart6 pinconf

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Caleb Connolly <caleb@xxxxxxxxxxxxx>

Use the new qup_uart6_4pin configuration in sd845.dtsi and fix alias
name.

Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
 .../boot/dts/qcom/sdm845-oneplus-common.dtsi  | 30 ++-----------------
 1 file changed, 3 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 392461c29e76..5d99908d4628 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -19,7 +19,7 @@
 / {
 	aliases {
 		serial0 = &uart9;
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 	};
 
 	chosen {
@@ -500,35 +500,11 @@ pinconf-rx {
 	};
 };
 
-/*
- * Prevent garbage data on bluetooth UART lines
- */
-&qup_uart6_default {
-	pinmux {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-pull-down;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
-
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
-- 
2.38.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux