There is a new driver for the Snapdragon 670 TLMM (Top-Level Mode Multiplexer). Document it. Adapted from qcom,sm6350-pinctrl.yaml. Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,sdm670-tlmm.yaml | 127 ++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml new file mode 100644 index 000000000000..7585117c0f06 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDM670 TLMM block + +maintainers: + - Richard Acayan <mailingradian@xxxxxxxxx> + +description: | + The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm670-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm670-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm670-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm670-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, + mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable, + qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, + qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk, + sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, + tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, + tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, + vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@3400000 { + compatible = "qcom,sdm670-tlmm"; + reg = <0x03400000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + + qup-i2c9-state { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; +... -- 2.38.0
