It typically takes between one and two milliseconds for the PHY to
become ready after starting it. Increase the tight 3--10 us polling
period to the more reasonable 51--200 us.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index b9260c8746bf..cd8fafe4c295 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -360,7 +360,7 @@ static int qmp_pcie_msm8996_serdes_init(struct qmp_phy *qphy)
SERDES_START | PCS_START);
status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
- ret = readl_poll_timeout(status, val, (val & PCS_READY), 10,
+ ret = readl_poll_timeout(status, val, (val & PCS_READY), 200,
PHY_INIT_COMPLETE_TIMEOUT);
if (ret) {
dev_err(qmp->dev,
@@ -514,7 +514,7 @@ static int qmp_pcie_msm8996_power_on(struct phy *phy)
qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
status = pcs + cfg->regs[QPHY_PCS_STATUS];
- ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 10,
+ ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
PHY_INIT_COMPLETE_TIMEOUT);
if (ret) {
dev_err(qmp->dev, "phy initialization timed-out\n");
--
2.35.1
