The QMP combo PHY driver does not use the "in-layout" configuration macro to configure registers that are typically accessed using "regs_layout" arrays (e.g. QPHY_START_CTRL) so drop this unused feature. Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 54 ++++++----------------- 1 file changed, 14 insertions(+), 40 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index 3889dcf73c59..84380852ba5b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -69,11 +69,6 @@ struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; - /* - * register part of layout ? - * if yes, then offset gives index in the reg-layout - */ - bool in_layout; /* * mask of lanes for which this register is written * for cases when second lane needs different values @@ -88,14 +83,6 @@ struct qmp_phy_init_tbl { .lane_mask = 0xff, \ } -#define QMP_PHY_INIT_CFG_L(o, v) \ - { \ - .offset = o, \ - .val = v, \ - .in_layout = true, \ - .lane_mask = 0xff, \ - } - #define QMP_PHY_INIT_CFG_LANE(o, v, l) \ { \ .offset = o, \ @@ -1346,7 +1333,6 @@ static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = { }; static void qmp_combo_configure_lane(void __iomem *base, - const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], int num, u8 lane_mask) @@ -1361,19 +1347,15 @@ static void qmp_combo_configure_lane(void __iomem *base, if (!(t->lane_mask & lane_mask)) continue; - if (t->in_layout) - writel(t->val, base + regs[t->offset]); - else - writel(t->val, base + t->offset); + writel(t->val, base + t->offset); } } static void qmp_combo_configure(void __iomem *base, - const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], int num) { - qmp_combo_configure_lane(base, regs, tbl, num, 0xff); + qmp_combo_configure_lane(base, tbl, num, 0xff); } static int qmp_combo_serdes_init(struct qmp_phy *qphy) @@ -1384,28 +1366,24 @@ static int qmp_combo_serdes_init(struct qmp_phy *qphy) const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl; int serdes_tbl_num = cfg->serdes_tbl_num; - qmp_combo_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num); + qmp_combo_configure(serdes, serdes_tbl, serdes_tbl_num); if (cfg->type == PHY_TYPE_DP) { switch (dp_opts->link_rate) { case 1620: - qmp_combo_configure(serdes, cfg->regs, - cfg->serdes_tbl_rbr, + qmp_combo_configure(serdes, cfg->serdes_tbl_rbr, cfg->serdes_tbl_rbr_num); break; case 2700: - qmp_combo_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr, + qmp_combo_configure(serdes, cfg->serdes_tbl_hbr, cfg->serdes_tbl_hbr_num); break; case 5400: - qmp_combo_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr2, + qmp_combo_configure(serdes, cfg->serdes_tbl_hbr2, cfg->serdes_tbl_hbr2_num); break; case 8100: - qmp_combo_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr3, + qmp_combo_configure(serdes, cfg->serdes_tbl_hbr3, cfg->serdes_tbl_hbr3_num); break; default: @@ -2069,29 +2047,25 @@ static int qmp_combo_power_on(struct phy *phy) } /* Tx, Rx, and PCS configurations */ - qmp_combo_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1); + qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1); - if (cfg->lanes >= 2) { - qmp_combo_configure_lane(qphy->tx2, cfg->regs, cfg->tx_tbl, - cfg->tx_tbl_num, 2); - } + if (cfg->lanes >= 2) + qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2); /* Configure special DP tx tunings */ if (cfg->type == PHY_TYPE_DP) cfg->configure_dp_tx(qphy); - qmp_combo_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); + qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1); - if (cfg->lanes >= 2) { - qmp_combo_configure_lane(qphy->rx2, cfg->regs, cfg->rx_tbl, - cfg->rx_tbl_num, 2); - } + if (cfg->lanes >= 2) + qmp_combo_configure_lane(qphy->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2); /* Configure link rate, swing, etc. */ if (cfg->type == PHY_TYPE_DP) cfg->configure_dp_phy(qphy); else - qmp_combo_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num); if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); -- 2.35.1