The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_i2c12_default pin configuration used second method - with a
"pinmux" child.
Fixes: 44acee207844 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Tested-by: Steev Klimaszewski <steev@xxxxxxxx>
---
Changes since v1:
1. Add tags.
---
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index be59a8ba9c1f..74f43da51fa5 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -487,8 +487,10 @@ pinconf {
};
&qup_i2c12_default {
- drive-strength = <2>;
- bias-disable;
+ pinmux {
+ drive-strength = <2>;
+ bias-disable;
+ };
};
&qup_uart6_default {
--
2.34.1
