On 2022-10-08 20:17:13, Konrad Dybcio wrote:
> Add a node for NXP PN553 NFC, using the nxp-nci driver.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
[On Sony Xperia 5 II, pdx206]
Tested-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
> Changes since v1:
> - dropped useless label
> - use generic node name
Thanks!
>
> arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> index f7d7f502f48b..ae94065c6daa 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> @@ -462,7 +462,16 @@ &i2c1 {
> status = "okay";
> clock-frequency = <400000>;
>
> - /* NXP PN553 NFC @ 28 */
> + nfc@28 {
> + compatible = "nxp,nxp-nci-i2c";
> + reg = <0x28>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <111 IRQ_TYPE_EDGE_RISING>;
> +
> + enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
> + firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> + };
> };
>
> &i2c2 {
> --
> 2.37.3
>
