Reference common Qualcomm TLMM pin controller schema, to bring common
properties, other pinctrl schemas and additional checks, like function
required only for GPIOs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 44 +++----------------
1 file changed, 6 insertions(+), 38 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index e39fbb36d8c1..3f5f5229a86c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -27,30 +27,13 @@ properties:
- const: south
- const: east
- interrupts:
- description: Specifies the TLMM summary IRQ
- maxItems: 1
-
+ interrupts: true
interrupt-controller: true
-
- '#interrupt-cells':
- description:
- Specifies the PIN numbers and Flags, as defined in defined in
- include/dt-bindings/interrupt-controller/irq.h
- const: 2
-
+ "#interrupt-cells": true
gpio-controller: true
-
- '#gpio-cells':
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
+ "#gpio-cells": true
+ gpio-ranges: true
gpio-reserved-ranges: true
-
wakeup-parent: true
#PIN CONFIGURATION NODES
@@ -69,6 +52,7 @@ patternProperties:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
properties:
pins:
@@ -120,31 +104,15 @@ patternProperties:
required:
- pins
- allOf:
- - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
- - if:
- properties:
- pins:
- pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
- then:
- required:
- - function
-
additionalProperties: false
allOf:
- - $ref: "pinctrl.yaml#"
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
required:
- compatible
- reg
- reg-names
- - interrupts
- - interrupt-controller
- - '#interrupt-cells'
- - gpio-controller
- - '#gpio-cells'
- - gpio-ranges
additionalProperties: false
--
2.34.1
