[PATCH v4 20/34] dt-bindings: pinctrl: qcom,msm8909-tlmm: fix indentation in example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/pinctrl/qcom,msm8909-tlmm.yaml   | 60 +++++++++----------
 1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
index 08e2dd5cbebe..9c647e24fa9a 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -118,35 +118,35 @@ $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-        pinctrl@1000000 {
-                compatible = "qcom,msm8909-tlmm";
-                reg = <0x1000000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 117>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio4";
-                                function = "blsp_uart1";
-                                bias-pull-up;
-                        };
-
-                        tx-pins {
-                                pins = "gpio5";
-                                function = "blsp_uart1";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@1000000 {
+        compatible = "qcom,msm8909-tlmm";
+        reg = <0x1000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 117>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
 ...
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux