On 11/21/2014 07:03 PM, Lina Iyer wrote:
Quad core SoCs like APQ8074, APQ8064, APQ8084 need SCM support set up
warm boot addresses in the Secure Monitor. Extend the SCM flags to
support warm boot addresses for secondary cores.
We do not need to export the warmboot flags. Move them into the
implementation file.
Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
Acked-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
+ one comment below
---
drivers/soc/qcom/scm-boot.c | 31 +++++++++++++++++++++++++++++++
include/soc/qcom/scm-boot.h | 3 +--
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/qcom/scm-boot.c b/drivers/soc/qcom/scm-boot.c
index 60ff7b4..0871659 100644
--- a/drivers/soc/qcom/scm-boot.c
+++ b/drivers/soc/qcom/scm-boot.c
@@ -21,6 +21,23 @@
#include <soc/qcom/scm.h>
#include <soc/qcom/scm-boot.h>
+#define SCM_FLAG_WARMBOOT_CPU0 0x04
+#define SCM_FLAG_WARMBOOT_CPU1 0x02
+#define SCM_FLAG_WARMBOOT_CPU2 0x10
+#define SCM_FLAG_WARMBOOT_CPU3 0x40
+
+struct scm_warmboot {
+ int flag;
+ void *entry;
+};
+
+static struct scm_warmboot scm_flags[] = {
+ { .flag = SCM_FLAG_WARMBOOT_CPU0 },
+ { .flag = SCM_FLAG_WARMBOOT_CPU1 },
+ { .flag = SCM_FLAG_WARMBOOT_CPU2 },
+ { .flag = SCM_FLAG_WARMBOOT_CPU3 },
+};
+
/*
* Set the cold/warm boot address for one of the CPU cores.
*/
@@ -37,3 +54,17 @@ int scm_set_boot_addr(phys_addr_t addr, int flags)
&cmd, sizeof(cmd), NULL, 0);
}
EXPORT_SYMBOL(scm_set_boot_addr);
+
+int scm_set_warm_boot_addr(void *entry, int cpu)
+{
+ int ret;
+
+ if (entry == scm_flags[cpu].entry)
+ return 0;
IMO, this test deserves a comment of why this is needed.
+
+ ret = scm_set_boot_addr(virt_to_phys(entry), scm_flags[cpu].flag);
+ if (!ret)
+ scm_flags[cpu].entry = entry;
+
+ return ret;
+}
diff --git a/include/soc/qcom/scm-boot.h b/include/soc/qcom/scm-boot.h
index 6aabb24..529f55a 100644
--- a/include/soc/qcom/scm-boot.h
+++ b/include/soc/qcom/scm-boot.h
@@ -16,9 +16,8 @@
#define SCM_FLAG_COLDBOOT_CPU1 0x01
#define SCM_FLAG_COLDBOOT_CPU2 0x08
#define SCM_FLAG_COLDBOOT_CPU3 0x20
-#define SCM_FLAG_WARMBOOT_CPU0 0x04
-#define SCM_FLAG_WARMBOOT_CPU1 0x02
int scm_set_boot_addr(phys_addr_t addr, int flags);
+int scm_set_warm_boot_addr(void *entry, int cpu);
#endif
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
