[PATCH 03/19] arm64: dts: qcom: qdru1000: Add tlmm nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add tlmm node for the QDU1000 and QRU1000 SoCs and the uart pin
configuration.

Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qdru1000.dtsi | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdru1000.dtsi b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
index 3610f94bef35..39b9a00d3ad8 100644
--- a/arch/arm64/boot/dts/qcom/qdru1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
@@ -235,6 +235,8 @@ uart7: serial@99c000 {
 				reg = <0x0 0x99c000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -248,6 +250,34 @@ tcsr_mutex: hwlock@1f40000 {
 			#hwlock-cells = <1>;
 		};
 
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
+			reg = <0x0 0xf000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_default: qup-uart7-default {
+				tx {
+					pins = "gpio134";
+					function = "qup0_se7_l2";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx {
+					pins = "gpio135";
+					function = "qup0_se7_l3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
-- 
2.37.3




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux