Hi all,
[ sorry for sending mail twice, now as plain text. I should move away
from gmail.com to something which allows to use mutt... ]
Some releases after 5.17 bullhead rev 1.01 started to reset.
I'm not sure which kernel version it started, because it might be
caused by kernel config or dts changes.
On current qcom/for-next (e89c75d437ca292d3ef377de341892f571d5d87a) it
resets immediately when loading sdhci controller (before reaching
initramfs).
I tried to disable sdhc1 and whole rpm_requests in
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi, which helped to
reach initramfs (from postmarketOS) and then it got reset in initramfs
during touching network [1] either in setup_usb_network() or later.
NOTE I'm using debug-shell hook [3], which probably calls
setup_usb_network().
I also tried to add tlmm { gpio-reserved-ranges = <85 4>; };
(inspiration from angler), but that obviously didn't help.
Maybe I have something harmful in config [4].
Any idea what could be wrong, what to try?
Kind regards,
Petr
