The ext 3.3V regulator is not part of the SoC, so pull it from the SoC
node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 50792f06855e..f718b37192e9 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -57,18 +57,16 @@ hdmi_con: endpoint {
};
};
- soc {
- ext_3p3v: regulator-fixed@1 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "ext_3p3v";
- regulator-type = "voltage";
- startup-delay-us = <0>;
- gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- };
+ ext_3p3v: regulator-ext-3p3v {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ext_3p3v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
};
};
--
2.35.1
