[PATCH v5 1/3] arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disable the pull-up for mi2s1 lines.

Signed-off-by: Judy Hsiao <judyhsiao@xxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
 .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index c11e37160f34..83a42a77121c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -639,6 +639,36 @@ &dp_hot_plug_det {
 	bias-disable;
 };
 
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
+
 &pcie1_clkreq_n {
 	bias-pull-up;
 	drive-strength = <2>;
-- 
2.37.3.998.g577e59143f-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux