Re: [PATCH v2 2/2] dt-bindings: add bindings for QCOM flash LED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2022/9/29 20:40, Krzysztof Kozlowski wrote:
On 29/09/2022 14:15, Fenglin Wu wrote:
Add binding document for flash LED module inside Qualcomm Technologies,
Inc. PMICs.

Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>

Thank you for your patch. There is something to discuss/improve.

+  reg:
+    description: address offset of the flash LED controller
+    maxItems: 1
+
+patternProperties:
+  "^led[0-3]$":

In such case: ^led-[0-9]$"
Sure, I will update in next patchset

+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description: |
+      Represents the physical LED components which are connected to the
+      flash LED channels' output.
+
+    properties:
+      led-sources:
+        description: |
+          The HW indices of the flash LED channels that connect to the
+          physical LED
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2, 3, 4]
+
+      led-max-microamp:
+        description: |
+          The maximum current value when LED is not operating in flash mode (i.e. torch mode)
+          Valid values when an LED is connected to one flash LED channel:
+            5000 - 500000, step by 5000
+          Valid values when an LED is connected to two flash LED channels:
+            10000 - 1000000, step by 10000
+        minimum: 5000
+        maximum: 1000000
+
+      flash-max-microamp:
+        description: |
+          The maximum current value when LED is operating in flash mode.
+          Valid values when an LED is connected to one flash LED channel:
+            12500 - 1500000, step by 12500
+          Valid values when an LED is connected to two flash LED channels:
+            25000 - 2000000, step by 12500
+        minimum: 12500
+        maximum: 2000000
+
+      flash-max-timeout-us:
+        description: |
+          The maximum timeout value when LED is operating in flash mode.
+          Valid values: 10000 - 1280000, step by 10000
+        minimum: 10000
+        maximum: 1280000
+
+    required:
+      - led-sources
+      - led-max-microamp
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    spmi_bus {

No underscores in node names, so just "bus"
Sure, I will update in next patchset

+        #address-cells = <1>;
+        #size-cells = <0>;

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux