Since commit d399723950c4 ("clk: qcom: gdsc: Fix the handling of
PWRSTS_RET support) retention mode can be used on sc8280xp to maintain
state during suspend instead of leaving the domain always on.
This is needed to eventually allow the parent CX domain to be powered
down during suspend.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/clk/qcom/gcc-sc8280xp.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
While we're not yet able to fully test this (since we're not hitting CX
power down) this can still go in as we'll need it in some form
eventually.
Note that the PCIe domains should remain always-on until we have driver
support for suspend in place.
Johan
diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
index 7768e6901dcc..a18ed88f3b82 100644
--- a/drivers/clk/qcom/gcc-sc8280xp.c
+++ b/drivers/clk/qcom/gcc-sc8280xp.c
@@ -6843,17 +6843,12 @@ static struct gdsc ufs_phy_gdsc = {
.pwrsts = PWRSTS_OFF_ON,
};
-/*
- * The Qualcomm DWC3 driver suspend implementation appears to be incomplete
- * for sc8280xp so keep the USB power domains always-on for now.
- */
static struct gdsc usb30_mp_gdsc = {
.gdscr = 0xab004,
.pd = {
.name = "usb30_mp_gdsc",
},
- .pwrsts = PWRSTS_OFF_ON,
- .flags = ALWAYS_ON,
+ .pwrsts = PWRSTS_RET_ON,
};
static struct gdsc usb30_prim_gdsc = {
@@ -6861,8 +6856,7 @@ static struct gdsc usb30_prim_gdsc = {
.pd = {
.name = "usb30_prim_gdsc",
},
- .pwrsts = PWRSTS_OFF_ON,
- .flags = ALWAYS_ON,
+ .pwrsts = PWRSTS_RET_ON,
};
static struct gdsc usb30_sec_gdsc = {
@@ -6870,8 +6864,7 @@ static struct gdsc usb30_sec_gdsc = {
.pd = {
.name = "usb30_sec_gdsc",
},
- .pwrsts = PWRSTS_OFF_ON,
- .flags = ALWAYS_ON,
+ .pwrsts = PWRSTS_RET_ON,
};
static struct clk_regmap *gcc_sc8280xp_clocks[] = {
--
2.35.1
