On Thu, 20 Nov 2014, Josh Cartwright wrote: > The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick > clock and four regulator resources. Provide definitions for them. > > Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++- > include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ > 2 files changed, 11 insertions(+), 1 deletion(-) What do you want me to do with this patch? I'm guessing the other patches in the set depend on these new defines? I can't even check because you've only send me 2 of the 3 patches in the set. > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 4264021..6d4e3ec 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -12,6 +12,7 @@ frequencies. > "qcom,rpm-apq8064" > "qcom,rpm-msm8660" > "qcom,rpm-msm8960" > + "qcom,rpm-ipq8064" > > - reg: > Usage: required > @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources. > "qcom,rpm-pm8901-ftsmps" > "qcom,rpm-pm8921-smps" > "qcom,rpm-pm8921-ftsmps" > + "qcom,rpm-smb208" > > - reg: > Usage: required > @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources. > QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4, > QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2, > QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4, > - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8 > + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8, > + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b, > + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b > > - bias-pull-down: > Usage: optional > diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h > index 388a6f3..13a9d4b 100644 > --- a/include/dt-bindings/mfd/qcom-rpm.h > +++ b/include/dt-bindings/mfd/qcom-rpm.h > @@ -141,6 +141,12 @@ > #define QCOM_RPM_SYS_FABRIC_MODE 131 > #define QCOM_RPM_USB_OTG_SWITCH 132 > #define QCOM_RPM_VDDMIN_GPIO 133 > +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 > +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 > +#define QCOM_RPM_SMB208_S1a 136 > +#define QCOM_RPM_SMB208_S1b 137 > +#define QCOM_RPM_SMB208_S2a 138 > +#define QCOM_RPM_SMB208_S2b 139 > > /* > * Constants used to select force mode for regulators. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
