Move the power-down-control register update that powers on the PHY to the power-on handler so that it matches the power-off handler. Note that the power-on handler is currently always called directly after init. Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index efffb77e8f45..db78d2d76c03 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -1862,7 +1862,6 @@ static int qmp_pcie_init(struct phy *phy) struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; const struct qmp_phy_cfg *cfg = qphy->cfg; - void __iomem *pcs = qphy->pcs; int ret; /* turn on regulator supplies */ @@ -1888,9 +1887,6 @@ static int qmp_pcie_init(struct phy *phy) if (ret) goto err_assert_reset; - qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], - cfg->pwrdn_ctrl); - return 0; err_assert_reset: @@ -1929,6 +1925,9 @@ static int qmp_pcie_power_on(struct phy *phy) unsigned int mask, val, ready; int ret; + qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); + qmp_pcie_serdes_init(qphy); ret = clk_prepare_enable(qphy->pipe_clk); -- 2.35.1
