On 28/09/2022 19:11, Souradeep Chowdhury wrote: > Documentation for Data Capture and Compare(DCC) device tree bindings > in yaml format. > > Signed-off-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx> I asked last time and there was just partial improvement, so let me be clear: you must rebase on latest kernel and use scripts/get_maintainers.pl. I am repeating myself, which should not be actually needed... but then maybe my comment was not accurate? If so, please post the output of `git describe` and `scripts/get_maintainers.pl __on_your_patches__` and let's go line by line... > --- > .../devicetree/bindings/soc/qcom/qcom,dcc.yaml | 44 ++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml > new file mode 100644 > index 0000000..8396b0c > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml > @@ -0,0 +1,44 @@ > +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/msm/qcom,dcc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Data Capture and Compare > + > +maintainers: > + - Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx> > + > +description: | > + DCC (Data Capture and Compare) is a DMA engine which is used to save > + configuration data or system memory contents during catastrophic failure > + or SW trigger. DCC is used to capture and store data for debugging purpose > + > +properties: > + compatible: > + items: > + - enum: > + - qcom,sm8150-dcc > + - qcom,sc7280-dcc > + - qcom,sc7180-dcc > + - qcom,sdm845-dcc > + - const: qcom,dcc > + > + reg: > + items: > + - description: DCC base register region > + - description: DCC RAM base register region > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + dma@10a2000{ > + compatible = "qcom,sm8150-dcc","qcom,dcc"; odd indentation. Use 4 spaces for example indentation. > + reg = <0x010a2000 0x1000>, > + <0x010ad000 0x2000>; > + }; Best regards, Krzysztof
