On Wed, 28 Sep 2022 10:42:39 +0800, Fenglin Wu wrote: > Add binding document for flash LED module inside Qualcomm Technologies, > Inc. PMICs. > > Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx> > --- > .../bindings/leds/leds-qcom-flash.yaml | 108 ++++++++++++++++++ > 1 file changed, 108 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-flash.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:21.17-32: Warning (reg_format): /example-0/flash-led@ee00:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:23.23-31.19: Warning (unit_address_vs_reg): /example-0/flash-led@ee00/led@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:33.23-41.19: Warning (unit_address_vs_reg): /example-0/flash-led@ee00/led@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
