[PATCH v6 0/3] Initial Samsung Galaxy Tab 4 10.1 (SM-T530) support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree node for pm8226 GPIOs and support for the Samsung Galaxy
Tab 4 10.1 (SM-T530) tablet which is based on apq8026.

Changes in v6:
  - Set status as last property in nodes
  - Pad register addresses to 8 hex digits

Changes in v5:
  - Rename pm8226-regulators node to fix issue reported by make dtbs_check

Changes in v4:
  - Move delete-node to memory-region
  - Move usb-switch node to blsp_i2c4

Changes in v3:
  - Fix sdhc_2 bus width
  - Reorder includes

Changes in v2:
  - Change codename to matisse-wifi
  - Remove msm-id from device dts
  - Rename pm8226 gpio node

Matti Lehtimäki (3):
  ARM: dts: qcom: pm8226: Add node for the GPIOs
  dt-bindings: arm: qcom: Document samsung,matisse-wifi device
  ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm/boot/dts/Makefile                    |   1 +
 .../dts/qcom-apq8026-samsung-matisse-wifi.dts | 453 ++++++++++++++++++
 arch/arm/boot/dts/qcom-pm8226.dtsi            |  10 +
 4 files changed, 465 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts

-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux