The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'. Otherwise the subnodes
(level one and two) are not properly matched.
qcom-sdx55-telit-fn980-tlb.dtb: pinctrl@f100000: 'pcie_ep_clkreq_default', 'pcie_ep_perst_default', 'pcie_ep_wake_default' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
This method also unifies the bindings with other Qualcomm TLMM and LPASS
pinctrl bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,sdx55-pinctrl.yaml | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index a38090b14aab..fff57abf4fbc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -45,9 +45,17 @@ properties:
gpio-reserved-ranges:
maxItems: 1
-#PIN CONFIGURATION NODES
patternProperties:
- '-pins$':
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdx55-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdx55-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdx55-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -146,7 +154,7 @@ examples:
#interrupt-cells = <2>;
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
- serial-pins {
+ serial-state {
pins = "gpio8", "gpio9";
function = "blsp_uart3";
drive-strength = <8>;
--
2.34.1
