On 26.09.2022 09:43, Krzysztof Kozlowski wrote:
> When BLSPI1 (originally SPI0, later renamed in commit f82c48d46852
> ("arm64: dts: qcom: ipq6018: correct QUP peripheral labels")) was added,
> the device node lacked respective pin configuration assignment. It
> used also blsp0_spi function but that was probably the same mistake as
> naming it SPI0.
>
> Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> index 1ba2eca33c7b..afc2dc79767d 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> @@ -37,6 +37,8 @@ &blsp1_i2c3 {
>
> &blsp1_spi1 {
> cs-select = <0>;
> + pinctrl-0 = <&spi_0_pins>;
> + pinctrl-names = "default";
> status = "okay";
>
> flash@0 {
> @@ -57,7 +59,7 @@ i2c_1_pins: i2c-1-pins {
>
> spi_0_pins: spi-0-pins {
> pins = "gpio38", "gpio39", "gpio40", "gpio41";
> - function = "blsp0_spi";
> + function = "blsp1_spi";
> drive-strength = <8>;
> bias-pull-down;
> };
