On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> qcom/sdm632-fairphone-fp3.dtb: pinctrl@1000000: 'cd-off-pins', 'cd-on-pins', 'gpio-key-default-pins', ....
> do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/msm8953.dtsi | 70 +++++++++++++--------------
> 1 file changed, 35 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> index 6b992a6d56c1..db94e6fd18f5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> @@ -460,229 +460,229 @@ tlmm: pinctrl@1000000 {
> interrupt-controller;
> #interrupt-cells = <2>;
>
> - uart_console_active: uart-console-active-pins {
> + uart_console_active: uart-console-active-state {
> pins = "gpio4", "gpio5";
> function = "blsp_uart2";
> drive-strength = <2>;
> bias-disable;
> };
>
> - uart_console_sleep: uart-console-sleep-pins {
> + uart_console_sleep: uart-console-sleep-state {
> pins = "gpio4", "gpio5";
> function = "blsp_uart2";
> drive-strength = <2>;
> bias-pull-down;
> };
>
> - sdc1_clk_on: sdc1-clk-on-pins {
> + sdc1_clk_on: sdc1-clk-on-state {
> pins = "sdc1_clk";
> bias-disable;
> drive-strength = <16>;
> };
>
> - sdc1_clk_off: sdc1-clk-off-pins {
> + sdc1_clk_off: sdc1-clk-off-state {
> pins = "sdc1_clk";
> bias-disable;
> drive-strength = <2>;
> };
>
> - sdc1_cmd_on: sdc1-cmd-on-pins {
> + sdc1_cmd_on: sdc1-cmd-on-state {
> pins = "sdc1_cmd";
> bias-disable;
> drive-strength = <10>;
> };
>
> - sdc1_cmd_off: sdc1-cmd-off-pins {
> + sdc1_cmd_off: sdc1-cmd-off-state {
> pins = "sdc1_cmd";
> bias-disable;
> drive-strength = <2>;
> };
>
> - sdc1_data_on: sdc1-data-on-pins {
> + sdc1_data_on: sdc1-data-on-state {
> pins = "sdc1_data";
> bias-pull-up;
> drive-strength = <10>;
> };
>
> - sdc1_data_off: sdc1-data-off-pins {
> + sdc1_data_off: sdc1-data-off-state {
> pins = "sdc1_data";
> bias-pull-up;
> drive-strength = <2>;
> };
>
> - sdc1_rclk_on: sdc1-rclk-on-pins {
> + sdc1_rclk_on: sdc1-rclk-on-state {
> pins = "sdc1_rclk";
> bias-pull-down;
> };
>
> - sdc1_rclk_off: sdc1-rclk-off-pins {
> + sdc1_rclk_off: sdc1-rclk-off-state {
> pins = "sdc1_rclk";
> bias-pull-down;
> };
>
> - sdc2_clk_on: sdc2-clk-on-pins {
> + sdc2_clk_on: sdc2-clk-on-state {
> pins = "sdc2_clk";
> drive-strength = <16>;
> bias-disable;
> };
>
> - sdc2_clk_off: sdc2-clk-off-pins {
> + sdc2_clk_off: sdc2-clk-off-state {
> pins = "sdc2_clk";
> bias-disable;
> drive-strength = <2>;
> };
>
> - sdc2_cmd_on: sdc2-cmd-on-pins {
> + sdc2_cmd_on: sdc2-cmd-on-state {
> pins = "sdc2_cmd";
> bias-pull-up;
> drive-strength = <10>;
> };
>
> - sdc2_cmd_off: sdc2-cmd-off-pins {
> + sdc2_cmd_off: sdc2-cmd-off-state {
> pins = "sdc2_cmd";
> bias-pull-up;
> drive-strength = <2>;
> };
>
> - sdc2_data_on: sdc2-data-on-pins {
> + sdc2_data_on: sdc2-data-on-state {
> pins = "sdc2_data";
> bias-pull-up;
> drive-strength = <10>;
> };
>
> - sdc2_data_off: sdc2-data-off-pins {
> + sdc2_data_off: sdc2-data-off-state {
> pins = "sdc2_data";
> bias-pull-up;
> drive-strength = <2>;
> };
>
> - sdc2_cd_on: cd-on-pins {
> + sdc2_cd_on: cd-on-state {
> pins = "gpio133";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - sdc2_cd_off: cd-off-pins {
> + sdc2_cd_off: cd-off-state {
> pins = "gpio133";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - gpio_key_default: gpio-key-default-pins {
> + gpio_key_default: gpio-key-default-state {
> pins = "gpio85";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - i2c_1_default: i2c-1-default-pins {
> + i2c_1_default: i2c-1-default-state {
> pins = "gpio2", "gpio3";
> function = "blsp_i2c1";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_1_sleep: i2c-1-sleep-pins {
> + i2c_1_sleep: i2c-1-sleep-state {
> pins = "gpio2", "gpio3";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_2_default: i2c-2-default-pins {
> + i2c_2_default: i2c-2-default-state {
> pins = "gpio6", "gpio7";
> function = "blsp_i2c2";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_2_sleep: i2c-2-sleep-pins {
> + i2c_2_sleep: i2c-2-sleep-state {
> pins = "gpio6", "gpio7";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_3_default: i2c-3-default-pins {
> + i2c_3_default: i2c-3-default-state {
> pins = "gpio10", "gpio11";
> function = "blsp_i2c3";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_3_sleep: i2c-3-sleep-pins {
> + i2c_3_sleep: i2c-3-sleep-state {
> pins = "gpio10", "gpio11";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_4_default: i2c-4-default-pins {
> + i2c_4_default: i2c-4-default-state {
> pins = "gpio14", "gpio15";
> function = "blsp_i2c4";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_4_sleep: i2c-4-sleep-pins {
> + i2c_4_sleep: i2c-4-sleep-state {
> pins = "gpio14", "gpio15";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_5_default: i2c-5-default-pins {
> + i2c_5_default: i2c-5-default-state {
> pins = "gpio18", "gpio19";
> function = "blsp_i2c5";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_5_sleep: i2c-5-sleep-pins {
> + i2c_5_sleep: i2c-5-sleep-state {
> pins = "gpio18", "gpio19";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_6_default: i2c-6-default-pins {
> + i2c_6_default: i2c-6-default-state {
> pins = "gpio22", "gpio23";
> function = "blsp_i2c6";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_6_sleep: i2c-6-sleep-pins {
> + i2c_6_sleep: i2c-6-sleep-state {
> pins = "gpio22", "gpio23";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_7_default: i2c-7-default-pins {
> + i2c_7_default: i2c-7-default-state {
> pins = "gpio135", "gpio136";
> function = "blsp_i2c7";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_7_sleep: i2c-7-sleep-pins {
> + i2c_7_sleep: i2c-7-sleep-state {
> pins = "gpio135", "gpio136";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_8_default: i2c-8-default-pins {
> + i2c_8_default: i2c-8-default-state {
> pins = "gpio98", "gpio99";
> function = "blsp_i2c8";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_8_sleep: i2c-8-sleep-pins {
> + i2c_8_sleep: i2c-8-sleep-state {
> pins = "gpio98", "gpio99";
> function = "gpio";
> drive-strength = <2>;
