[PATCH v2 05/33] ARM: dts: qcom: msm8226: align TLMM pin configuration with DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts |  6 +++---
 arch/arm/boot/dts/qcom-msm8226.dtsi         | 24 ++++++++++-----------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index 193569f0ca5f..02bef5870526 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -299,8 +299,8 @@ bluetooth_default_state: bluetooth-default-state {
 		input-enable;
 	};
 
-	touch_pins: touch {
-		irq {
+	touch_pins: touch-state {
+		irq-pins {
 			pins = "gpio17";
 			function = "gpio";
 
@@ -309,7 +309,7 @@ irq {
 			input-enable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio16";
 			function = "gpio";
 
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index cf2d56929428..3b6e746a4af9 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -354,35 +354,35 @@ tlmm: pinctrl@fd510000 {
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 
-			blsp1_i2c1_pins: blsp1-i2c1 {
+			blsp1_i2c1_pins: blsp1-i2c1-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_pins: blsp1-i2c2 {
+			blsp1_i2c2_pins: blsp1-i2c2-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_pins: blsp1-i2c3 {
+			blsp1_i2c3_pins: blsp1-i2c3-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c4_pins: blsp1-i2c4 {
+			blsp1_i2c4_pins: blsp1-i2c4-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c5_pins: blsp1-i2c5 {
+			blsp1_i2c5_pins: blsp1-i2c5-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
@@ -390,13 +390,13 @@ blsp1_i2c5_pins: blsp1-i2c5 {
 			};
 
 			sdhc1_default_state: sdhc1-default-state {
-				clk {
+				clk-pins {
 					pins = "sdc1_clk";
 					drive-strength = <10>;
 					bias-disable;
 				};
 
-				cmd-data {
+				cmd-data-pins {
 					pins = "sdc1_cmd", "sdc1_data";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -404,13 +404,13 @@ cmd-data {
 			};
 
 			sdhc2_default_state: sdhc2-default-state {
-				clk {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <10>;
 					bias-disable;
 				};
 
-				cmd-data {
+				cmd-data-pins {
 					pins = "sdc2_cmd", "sdc2_data";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -418,21 +418,21 @@ cmd-data {
 			};
 
 			sdhc3_default_state: sdhc3-default-state {
-				clk {
+				clk-pins {
 					pins = "gpio44";
 					function = "sdc3";
 					drive-strength = <8>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "gpio43";
 					function = "sdc3";
 					drive-strength = <8>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio39", "gpio40", "gpio41", "gpio42";
 					function = "sdc3";
 					drive-strength = <8>;
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux