On Sat, Sep 24, 2022 Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> wrote: > > Call phy_set_mode_ext() to notify the PHY driver that the PHY is being > used in the EP mode. > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Reviewed-by: Jingoo Han <jingoohan1@xxxxxxxxx> Best regards, Jingoo Han > --- > drivers/pci/controller/dwc/pcie-qcom-ep.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c > index ec99116ad05c..8dcfeed24424 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c > +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c > @@ -13,6 +13,7 @@ > #include <linux/delay.h> > #include <linux/gpio/consumer.h> > #include <linux/mfd/syscon.h> > +#include <linux/phy/pcie.h> > #include <linux/phy/phy.h> > #include <linux/platform_device.h> > #include <linux/pm_domain.h> > @@ -240,6 +241,10 @@ static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep) > if (ret) > goto err_disable_clk; > > + ret = phy_set_mode_ext(pcie_ep->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_EP); > + if (ret) > + goto err_phy_exit; > + > ret = phy_power_on(pcie_ep->phy); > if (ret) > goto err_phy_exit; > -- > 2.35.1 >
