Convert the mdp5.txt into the yaml format. Changes to the existing (txt) schema: - MSM8996 has additional "iommu" clock, define it separately - Add new properties used on some of platforms: - interconnects, interconnect-names - iommus - power-domains - operating-points-v2, opp-table Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- Dependency: https://lore.kernel.org/linux-arm-msm/20220924123611.225520-2-dmitry.baryshkov@xxxxxxxxxx/ --- .../devicetree/bindings/display/msm/mdp5.txt | 132 ----------------- .../bindings/display/msm/qcom,mdp5.yaml | 137 ++++++++++++++++++ 2 files changed, 137 insertions(+), 132 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp5.txt create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt deleted file mode 100644 index 65d03c58dee6..000000000000 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ /dev/null @@ -1,132 +0,0 @@ -Qualcomm adreno/snapdragon MDP5 display controller - -Description: - -This is the bindings documentation for the MDP5 display -controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. - -MDP5: -Required properties: -- compatible: - * "qcom,mdp5" - MDP5 -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdp_phys" -- interrupts: Interrupt line from MDP5 to MDSS interrupt controller. -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. -- * "bus" -- * "iface" -- * "core" -- * "vsync" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The availability of output ports can vary across SoC revisions: - - For MSM8974 and APQ8084: - Port 0 -> MDP_INTF0 (eDP) - Port 1 -> MDP_INTF1 (DSI1) - Port 2 -> MDP_INTF2 (DSI2) - Port 3 -> MDP_INTF3 (HDMI) - - For MSM8916: - Port 0 -> MDP_INTF1 (DSI1) - - For MSM8994 and MSM8996: - Port 0 -> MDP_INTF1 (DSI1) - Port 1 -> MDP_INTF2 (DSI2) - Port 2 -> MDP_INTF3 (HDMI) - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - * "tbu" - * "tbu_rt" - -Example: - -/ { - ... - - mdss: mdss@1a00000 { - compatible = "qcom,mdss"; - reg = <0x1a00000 0x1000>, - <0x1ac8000 0x3000>; - reg-names = "mdss_phys", "vbif_phys"; - - power-domains = <&gcc MDSS_GDSC>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync" - - interrupts = <0 72 0>; - - interrupt-controller; - #interrupt-cells = <1>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mdp: mdp@1a01000 { - compatible = "qcom,mdp5"; - reg = <0x1a01000 0x90000>; - reg-names = "mdp_phys"; - - interrupt-parent = <&mdss>; - interrupts = <0 0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - - dsi0: dsi@1a98000 { - ... - ports { - ... - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; - }; - }; - ... - }; - ... - }; - - dsi_phy0: dsi-phy@1a98300 { - ... - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml new file mode 100644 index 000000000000..574e8b7bd67b --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5) + +description: > + MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 + and MSM8996. + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> + - Rob Clark <robdclark@xxxxxxxxx> + +properties: + compatible: + const: qcom,mdp5 + + reg: + maxItems: 1 + + reg-names: + items: + - const: mdp_phys + + interrupts: + maxItems: 1 + + clocks: + minItems: 4 + maxItems: 7 + + clock-names: + oneOf: + - minItems: 4 + items: + - const: iface + - const: bus + - const: core + - const: vsync + - const: lut + - const: tbu + - const: tbu_rt + #MSM8996 has additional iommu clock + - items: + - const: iface + - const: bus + - const: core + - const: iommu + - const: vsync + + interconnects: + minItems: 1 + items: + - description: Interconnect path from mdp0 (or a single mdp) port to the data bus + - description: Interconnect path from mdp1 port to the data bus + - description: Interconnect path from rotator port to the data bus + + interconnect-names: + minItems: 1 + items: + - const: mdp0-mem + - const: mdp1-mem + - const: rotator-mem + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + + patternProperties: + "^port@[0-9a-f]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x1a01000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... -- 2.35.1
