Re: [PATCH v7 06/12] dt-bindings: display/msm: split dpu-sc7180 into DPU and MDSS parts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 22 Sept 2022 at 10:08, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 15/09/2022 15:37, Dmitry Baryshkov wrote:
> > In order to make the schema more readable, split dpu-sc7180 into the DPU
> > and MDSS parts, each one describing just a single device binding.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
>
> Thank you for your patch. There is something to discuss/improve.
>
> > +---
> > +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Display DPU dt properties for SC7180 target
> > +
> > +maintainers:
> > +  - Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx>
> > +
>
> missing allOf
>
> > +$ref: /schemas/display/msm/dpu-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: qcom,sc7180-dpu
> > +
> > +  reg:
> > +    items:
> > +      - description: Address offset and size for mdp register set
> > +      - description: Address offset and size for vbif register set
> > +
> > +  reg-names:
> > +    items:
> > +      - const: mdp
> > +      - const: vbif
> > +
> > +  clocks:
> > +    items:
> > +      - description: Display hf axi clock
> > +      - description: Display ahb clock
> > +      - description: Display rotator clock
> > +      - description: Display lut clock
> > +      - description: Display core clock
> > +      - description: Display vsync clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: bus
> > +      - const: iface
> > +      - const: rot
> > +      - const: lut
> > +      - const: core
> > +      - const: vsync
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
> > +    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> > +    #include <dt-bindings/power/qcom-rpmpd.h>
> > +
> > +    display-controller@ae01000 {
> > +        compatible = "qcom,sc7180-dpu";
> > +        reg = <0x0ae01000 0x8f000>,
> > +              <0x0aeb0000 0x2008>;
> > +
> > +        reg-names = "mdp", "vbif";
> > +
> > +        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> > +        clock-names = "bus", "iface", "rot", "lut", "core",
> > +                      "vsync";
> > +
> > +        interrupt-parent = <&mdss>;
> > +        interrupts = <0>;
> > +        power-domains = <&rpmhpd SC7180_CX>;
> > +        operating-points-v2 = <&mdp_opp_table>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port@0 {
> > +                reg = <0>;
> > +                endpoint {
> > +                    remote-endpoint = <&dsi0_in>;
> > +                };
> > +            };
> > +
> > +            port@2 {
> > +                reg = <2>;
> > +                endpoint {
> > +                    remote-endpoint = <&dp_in>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +...
> > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
> > new file mode 100644
> > index 000000000000..e507c091b60f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
> > @@ -0,0 +1,84 @@
> > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm SC7180 Display MDSS
> > +
> > +maintainers:
> > +  - Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx>
> > +
> > +description:
> > +  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
> > +  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> > +  bindings of MDSS are mentioned for SC7180 target.
> > +
>
> missing allOf.
>
> > +$ref: /schemas/display/msm/mdss-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: qcom,sc7180-mdss
> > +
> > +  clocks:
> > +    items:
> > +      - description: Display AHB clock from gcc
> > +      - description: Display AHB clock from dispcc
> > +      - description: Display core clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: iface
> > +      - const: ahb
> > +      - const: core
> > +
> > +  iommus:
> > +    maxItems: 1
> > +
> > +  interconnects:
> > +    maxItems: 1
> > +
> > +  interconnect-names:
> > +    maxItems: 1
> > +
> > +patternProperties:
> > +  "^display-controller@[0-9a-f]+$":
> > +    type: object
> > +    properties:
> > +      compatible:
> > +        const: qcom,sc7180-dpu
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
> > +    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interconnect/qcom,sdm845.h>
> > +    #include <dt-bindings/power/qcom-rpmpd.h>
> > +
> > +    display-subsystem@ae00000 {
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        compatible = "qcom,sc7180-mdss";
> > +        reg = <0xae00000 0x1000>;
> > +        reg-names = "mdss";
> > +        power-domains = <&dispcc MDSS_GDSC>;
> > +        clocks = <&gcc GCC_DISP_AHB_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > +                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> > +        clock-names = "iface", "ahb", "core";
> > +
> > +        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <1>;
> > +
> > +        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
> > +        interconnect-names = "mdp0-mem";
> > +
> > +        iommus = <&apps_smmu 0x800 0x2>;
> > +        ranges;
>
> This should come with full example, so with display-controller child
> (unless Rob asked not to?)

I'm not sure here. We have an example of a display-controller in a
separate schema file. Why would you like to duplicate it?


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux