Hi, Am 10.11.2014 um 23:52 schrieb Bjorn Andersson: > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 4264021..4671eef 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -112,6 +112,13 @@ of valid subnodes that can operate on these resources. > Definition: select that the power supply should operate in hysteretic > mode, instead of the default pwm mode > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM "assistance" > + after going to sleep > + > Standard regulator bindings are used inside switch mode power supply subnodes. > Check Documentation/devicetree/bindings/regulator/regulator.txt for more > details. > @@ -160,6 +167,13 @@ details. > qcom,rpm-pm8921-nldo, > qcom,rpm-pm8921-nldo1200 > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM ditto > + after going to sleep > + > Standard regulator bindings are used inside switch low-dropout regulator > subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for > more details. > @@ -190,6 +204,13 @@ more details. > 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, > 1480000, 1370000, 1280000, 1200000 > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM ditto > + after going to sleep > + > Standard regulator bindings are used inside negative charge pump regulator > subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for > more details. > @@ -215,6 +236,13 @@ more details. > QCOM_RPM_PM8921_LVS1 - QCOM_RPM_PM8921_LVS7, > QCOM_RPM_PM8921_MVS > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM ditto > + after going to sleep > + > = EXAMPLE > > #include <dt-bindings/mfd/qcom-rpm.h> [snip] Regards, Andreas -- SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 21284 AG Nürnberg -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
