Re: [PATCH 15/17] phy: qcom-qmp-ufs: consolidate lane config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20/09/2022 09:38, Johan Hovold wrote:
For legacy reasons, there are two configuration parameters that describe
the number of lanes a PHY has.

Replace them both with a new field simply named "lanes".

Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 31 ++++++++-----------------
  1 file changed, 10 insertions(+), 21 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index ca9a42250556..d21b977850b3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -533,8 +533,7 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
/* struct qmp_phy_cfg - per-PHY initialization config */
  struct qmp_phy_cfg {
-	/* number of lanes provided by phy */
-	int nlanes;
+	int lanes;
/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
  	const struct qmp_phy_init_tbl *serdes_tbl;
@@ -561,9 +560,6 @@ struct qmp_phy_cfg {
  	/* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
  	unsigned int phy_status;
- /* true, if PHY has secondary tx/rx lanes to be configured */
-	bool is_dual_lane_phy;
-
  	/* true, if PCS block has no separate SW_RESET register */
  	bool no_pcs_sw_reset;
  };
@@ -662,7 +658,7 @@ static const char * const qmp_phy_vreg_l[] = {
  };
static const struct qmp_phy_cfg msm8996_ufs_cfg = {
-	.nlanes			= 1,
+	.lanes			= 1,
.serdes_tbl = msm8996_ufs_serdes_tbl,
  	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufs_serdes_tbl),
@@ -687,7 +683,7 @@ static const struct qmp_phy_cfg msm8996_ufs_cfg = {
  };
static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
-	.nlanes			= 2,
+	.lanes			= 2,
.serdes_tbl = sdm845_ufsphy_serdes_tbl,
  	.serdes_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
@@ -707,12 +703,11 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
  	.pwrdn_ctrl		= SW_PWRDN,
  	.phy_status		= PHYSTATUS,
- .is_dual_lane_phy = true,
  	.no_pcs_sw_reset	= true,
  };
static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
-	.nlanes			= 1,
+	.lanes			= 1,
.serdes_tbl = sm6115_ufsphy_serdes_tbl,
  	.serdes_tbl_num		= ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
@@ -735,7 +730,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
  };
static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
-	.nlanes			= 2,
+	.lanes			= 2,
.serdes_tbl = sm8150_ufsphy_serdes_tbl,
  	.serdes_tbl_num		= ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
@@ -754,12 +749,10 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
  	.start_ctrl		= SERDES_START,
  	.pwrdn_ctrl		= SW_PWRDN,
  	.phy_status		= PHYSTATUS,
-
-	.is_dual_lane_phy	= true,
  };
static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
-	.nlanes			= 2,
+	.lanes			= 2,
.serdes_tbl = sm8350_ufsphy_serdes_tbl,
  	.serdes_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
@@ -778,12 +771,10 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
  	.start_ctrl		= SERDES_START,
  	.pwrdn_ctrl		= SW_PWRDN,
  	.phy_status		= PHYSTATUS,
-
-	.is_dual_lane_phy	= true,
  };
static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
-	.nlanes			= 2,
+	.lanes			= 2,
.serdes_tbl = sm8350_ufsphy_serdes_tbl,
  	.serdes_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
@@ -802,8 +793,6 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
  	.start_ctrl		= SERDES_START,
  	.pwrdn_ctrl		= SW_PWRDN,
  	.phy_status		= PHYSTATUS,
-
-	.is_dual_lane_phy	= true,
  };
static void qmp_ufs_configure_lane(void __iomem *base,
@@ -956,14 +945,14 @@ static int qmp_ufs_power_on(struct phy *phy)
  	/* Tx, Rx, and PCS configurations */
  	qmp_ufs_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1);
- if (cfg->is_dual_lane_phy) {
+	if (cfg->lanes >= 2) {
  		qmp_ufs_configure_lane(qphy->tx2, cfg->regs,
  					cfg->tx_tbl, cfg->tx_tbl_num, 2);
  	}
qmp_ufs_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); - if (cfg->is_dual_lane_phy) {
+	if (cfg->lanes >= 2) {
  		qmp_ufs_configure_lane(qphy->rx2, cfg->regs,
  					cfg->rx_tbl, cfg->rx_tbl_num, 2);
  	}
@@ -1122,7 +1111,7 @@ static int qmp_ufs_create(struct device *dev, struct device_node *np, int id,
  	if (IS_ERR(qphy->pcs))
  		return PTR_ERR(qphy->pcs);
- if (cfg->is_dual_lane_phy) {
+	if (cfg->lanes >= 2) {
  		qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
  		if (IS_ERR(qphy->tx2))
  			return PTR_ERR(qphy->tx2);

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux